 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Product Bulletin OPB360 August 1996 Slotted Optical Switches Types OPB360, OPB370 Series Package N Package L Package P Package T Features *0.125" (3.18 mm) wide gap *Choice of aperture *Choice of opaque or IR transmissive shell material *Choice of mounting configuration *Choice of lead spacing Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +85o C Lead Soldering Temperature Range [1/16 inch (1.6 mm) from case for 5 sec. with soldering iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C(2) Input Diode Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Peak Forward Current (1 s pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . 3.0 A Reverse DC Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1) Description The OPB360/370 series of slotted switches provides the design engineer with the flexibility of a custom device from a standard product line. Building from a standard housing with a .125" (3.18 mm) wide slot, the user can specify (1) electrical output parameters, (2) mounting tab configuration, (3) choice of lead spacing, (4) discrete shell material, and (5) aperture width. All housings are an opaque grade of injection-molded plastic to minimize the assembly's sensitivity to ambient radiation, both visible and near-infrared. Discrete shells (exposed on the parallel faces inside the device throat) are either IR transmissive plastic for applications where aperture contamination may occur or opaque plastic with aperture openings for maximum protection against ambient light. Output Phototransistor Collector-Emitter Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V Emitter-Collector Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V Collector DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1) Notes: (1) Derate linearly 1.67 mW/o C above 25o C. (2) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. (3) All parameters tested using pulse technique. (4) Lead spacing of 0.220" (5.59 mm) or 0.320" (8.13 mm) is available. Leads are 0.20" sq. (5.08 mm) and 0.425" (10.80 mm) long (min). (5) Methanol and isopropanol are recommended as cleaning agents. Plastic housings are soluble in chlorinated hydrocarbons and ketones. (6) Polarity is denoted by color of housing top: LED - Gray or Clear Sensor - Black Replaces/Upgrades OPB860, OPB870 Series Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 12-8 (972) 323-2200 Fax (972) 323-2396 Types OPB360, OPB370 Series Electrical Characteristics (TA = 25o C unless otherwise noted) SYMBOL Input Diode VF IR V(BR)CEO V(BR)ECO ICEO PARAMETER MIN MAX UNITS 1.7 100 30 5.0 100 V A V V nA IF = 20 mA VR = 2 V IC = 1 mA IE = 100 A TEST CONDITIONS Forward Voltage Reverse Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Dark Curreent On-State Collector Current OPB360T, N, L, P55 OPB365T, N, L, P55 OPB370T, N, L, P55 OPB375T, N, L, P55 Output Phototransistor VCE = 10 V, IF = 0, Ee = 0 Coupled 3.5 14.0 mA VCE = 0.4 V, IF = 20 mA IC(ON) OPB360T, N, L, P51 OPB365T, N, L, P51 OPB370T, N, L, P51 OPB375T, N, L, P51 OPB360T, N, L, P11 OPB365T, N, L, P11 OPB370T, N, L, P11 OPB375T, N, L, P11 2.5 10.0 mA VCE = 0.4 V, IF = 20 mA 1.0 5.0 mA VCE = 0.4 V, IF = 20 mA PART NUMBER GUIDE OPB 3 X X X X X Optek Assembly Aperture Width In Front of Sensor 5 = .0.050" 1 = 0.010" Phototransistor Output Family Discrete Shell Material Designation 6 - Base Mount IR Transmissive Plastic Discrete Shell PC Mountable Leads 7 - Base Mount Opaque Plastic Discrete Shell PC Mountable Leads Lead Space Designator 0 = 0.320"(8.12 mm) Lead Space 5 = 0.220"(5.59 mm) Lead Space Aperture Width In Front of Emitter 5 = 0.050" 1= 0.010" Mounting Configurations T -Both Mounting Tabs N - No Mounting Tabs L - Single Mounting Tab Emitter Side P - Single Mounting Tab Phototransistor Side Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972) 323-2200 Fax (972) 323-2396 12-9 Types OPB360, OPB370 Series GRAY/CLEAR TOP DENOTES LED Package Configuration T Package Configuration N GRAY/CLEAR TOP DENOTES LED GRAY/CLEAR TOP DENOTES LED Package Configuration P 4 3 GRAY/CLEAR TOP DENOTES LED Package Configuration L Notes: (1) Dimension controlled at housing surace only. (2) Methanol and isopropanol are recommended as cleaning agents. Housings are soluble in chlorinated hydrocarbons and ketones. Highly activated, water soluble fluxes may attack housings in some situations. (3) OPB360, OPB370 (4) OPB365, OPB375 (5) Aperture dimensions dependent on part number. See Part Number Guide Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 12-10 (972) 323-2200 Fax (972) 323-2396 Types OPB360, OPB370 Series Typical Performance Curves Normalized Output Current vs Forward Current VCE = 0.4 V Normalized to IF = 20 mA Normalized Output Current vs Ambient Temperature +2 Typ -2 +2 Typ +2 Typ -2 +2 Typ -2 -2 VCE = 0.4 V IF = 20 mA Normalized to TA = 25o C IF - Forward Current - mA TA - Ambient Temperature - o C Rise and Fall Time vs Load Resistance IF = 20 mA (50% Duty Cycle) VCE = 0.4 V Rise Time Fall Time RL - Load Resistance - All Part Numbers Ending in "1" Normalized Output Current vs Forward Current +2 Typ -2 Rise and Fall Time vs Load Resistance IF = 20 mA (50% Duty Cycle) VCE = 0.4 V Rise Time Fall Time +2 Typ -2 VCE = 0.4 V Normalized to IF = 20 mA IF - Forward Current - mA RL - Load Resistance - Optek reserves the right to make changes at any time in order to improve design and to supply the best possible product. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 12-11 (972) 323-2200 Fax (972) 323-2396 |
Price & Availability of OPB370
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |